0n30 EAR - Class 61


0n30 On30 on30 EAR Class 61

3D design, Chassis will be designed to fit 16.5 mm, 19.05 mm and 22.5 mm track gauges. The prototype is built for meter gauge.

On30 EAR Class 61

Other slicing software - different results - but, the whole thing becomes printable. Some adjustments here and there to counteract the deformation of the prints are still necessary.

On30 EAR Class 61

Chassis in comparison: left, printed on the Elegoo Mars - right, printed on my Witbox 2.

0n30 EAR Class 61

Printed using the original Elegoo black resin - directly from the printer the results were good. As I did not have access to my curing station, the parts did not cure sufficiently and bent.

on30 EAR Class 61

For driving tests and to verify the fit of the components, the parts are useful - in the meantime, new parts are printed in good quality and are waiting for assembly and painting.

Unlike the L45H, the wheels are printed on this design. The locomotive is powered by batteries. Via a simple Arduino 2.4GHz connection the model can be remote controlled. More then in the section "Electronics" (coming soon) .

And wow, this beast is really big! But also ingenious in tight curves (r=360mm). Thanks to the gear motors it also runs very slowly.